Latest HPE0-S60 Practice Test Questions Verified Answers As Experienced in the Actual Test!
Pass HP HPE0-S60 Exam in First Attempt Easily
NEW QUESTION # 29
What is one of me benefits of using HPE Composer 2?
- A. HPE Composer 2 modules are required to manage HPE virtual Connect SE 100GD F32 Modules for Synergy
- B. The administrator can access an HPE Synergy Composer 2 appliance remotely to perform First Time Setup
- C. HPE Composer 2 has 128GB of memory and 4 AMD CPUs to improve performance of me management system
- D. A pair of HPE Composer 2 modules can manage 42 frames, compared to 21 frames managed by HPE Composer
Answer: C
NEW QUESTION # 30
Put the steps of the HPE infosight flow in the correct order.
Answer:
Explanation:
1 - Observing
2 - Learning
3 - Predicting
4 - Recommending
5 - Acting
NEW QUESTION # 31
You configured a vVoI datastore using HPE Storage integration Pack for VMware vCenter.
Which storage object should you check using SSMC to verify whether vVol datastore is configured property?
- A. virtual Volume
- B. Storage Container
- C. App Volume Set
- D. Virtual Volume Set
Answer: D
NEW QUESTION # 32
You modified a logical interconnect group mat is used to configure logical interconnects in five different logical enclosures. What will be the impact of that change?
- A. All physical interconnects from affected logical interconnects will be placed in a maintenance mode
- B. All logical interconnects configured using this logical Interconnect group will report inconsistency
- C. All logical interconnects configured using this logical interconnect group will be automatically updated
- D. All physical interconnects from the affected logical interconnects must he rebooted to activate the new configuration
Answer: A
NEW QUESTION # 33
In the past a customer experienced a networking issue where network ports went down and came back up in quick succession.
Which HPE Virtual Connect SE 100 GD F32 Module for HPE Synergy feature can be configured to disable such ports?
- A. Pause flood protection
- B. Port flap protection
- C. Storm control
- D. sFlow
Answer: D
NEW QUESTION # 34
Match HPE Superdome Flex system with its specific feature.
Answer:
Explanation:
NEW QUESTION # 35
Which statement about login redistribution is true?
- A. Login redistribution is available only If HPE Primera or HPE Alletra is connected directly to the HPE Synergy frame
- B. Login redistribution is supported only on the HPE Synergy Virtual Connect SE 32Gb FC Modules
- C. Login redistribution is a licensed feature and the number of licenses required depends on the number of active ports
- D. Login redistribution is used for login balancing when they are not distributed evenly over the FC links
Answer: B
NEW QUESTION # 36
Which statement about HPE Superdome nPars is true?
- A. nPars are supported only with 3rd Generation Intel Xeon Scalable Processors
- B. Chassis in the same nPar can have different CPU configuration
- C. Chassis in the same nPar can have different memory configuration
- D. Rack Management Controller is required Tor nPar configuration
Answer: D
NEW QUESTION # 37
An HPE Synergy customer needs to prevent a timeout and loss of communication during an external switch firmware upgrade.
Click the parameter that the customer should configure within an uplink set to meet this requirement
Answer:
Explanation:
NEW QUESTION # 38
Your customer uses HPE OneView to manage their HPE Synergy environment. They plan to use it to manage a new set equipment that includes.
- 20 HPE ProLiant DL365 Gen10 Plus servers
- 20 HPE ProLiant DL380 Gen10 Plus servers
- 5 HPE Primera 650
- 5 HPE MSA 2062 Storage Array
Which statements about now OneView will work with this new equipment are true? (Select two)
- A. HPE OneView replaces array management tools for both types of array
- B. HPE ProLiant DL365 Gen10 Plus servers are not supported in HPE OneView
- C. HPE ProLiant DL380 Gen10 Plus servers have an HPE OneView license included
- D. HPE Primera 650 can be managed using HPE OneView.
- E. HPE MSA 2062 Storage Array is not supported in HPE OneView
Answer: C
NEW QUESTION # 39
Refer to the exhibit.
Which statement about this logical interconnect group is true?
- A. Both modules are located in different frames for redundancy
- B. An additional license is required to change the enclosure count
- C. interconnect modules are installed in interconnect bays 1 and 4
- D. For an uplink set, ports from different modules can be selected
Answer: B
NEW QUESTION # 40
Which statement about HPE OneView milestone releases is true?
- A. A milestone release is a release with an enhanced update architecture mat is a prerequisite prior to updating to a subsequent release.
- B. A milestone release is a release that is published when HPE releases new hardware components to immediately support new systems
- C. A milestone release is a release which must be installed on HPE Composer to support current version of the Service Pack for Synergy
- D. A milestone release is available for selected partners that give access to HPE OneView features which are not officially announced.
Answer: C
NEW QUESTION # 41
What is a restriction of using a RoCE network?
- A. It does not support smart link and private network features.
- B. It is by default configured as an untagged network and cannot be a part of a network set.
- C. it is not supported with HPE Virtual Connect SE 40 GD F8 Module for HPE Synergy.
- D. It does not support Private VLAN and Multicast VLAN.
Answer: B
NEW QUESTION # 42
Your customer added a new Ethernet network in HPE Oneview mat is used to manage their HPE Synergy platform.
When the customer tries to connect one of the compute nodes to this network through the server profile, this network is not available.
What must be done to fix this issue?
- A. The newly created network must be added to the uplink set within the LIG, and Logical interconnect configuration must be updated from the LIG.
- B. Check the Logical Enclosure settings and verify if the maximum number of networks allowed for this LE is reached.
- C. Check within the server profile which server hardware is used and perform the Refresh operation on this compute node to get the latest adapter information.
- D. To make this network available to use in the server profile, the customer must enable the Smart Link feature within network definition.
Answer: A
NEW QUESTION # 43
Match each HPE Synergy logical component with the definition.
Answer:
Explanation:
NEW QUESTION # 44
Your customer has 6 logical enclosures spanning 18 HPE Synergy frames. The customer needs to add one more logical enclosure based on 5 HPE Synergy frames How will this change impact the customer environment?
- A. The customer has to create a new management ring for new logical enclosure because the maximum number of frames m a single management ring is reached.
- B. The customer can add a new logical enclosure to an existing setup once all required licenses are added lo HPE OneView and associated with the new frames.
- C. The customer can add a new logical enclosure to the existing setup because the maximum number of logical enclosures in a single management ring is not reached.
- D. The customer has to expand the management ring capacity either by adding HPE Composer 2 modules or adding memory to reach 128GB per module.
Answer: C
NEW QUESTION # 45
What is a limitation when creating a server profile?
- A. It is not possible to create shared volumes on demand through a server profile
- B. BIOS settings can be changed only when UEFI optimized is selected as boot mode
- C. Administrator cannot define more than 8 connections within a server profile
- D. ILO management is limited to the integration with Active Directory or LDAP
Answer: D
NEW QUESTION # 46
Click the drop-down menu that will allow you to define the location of the master modules within the logical interconnect group.
Answer:
Explanation:
NEW QUESTION # 47
Refer to the exhibit.
Which statement about this logical JBOD is true?
- A. After deleting this logical JBOD drives will he blocked for 12h m case this JBOD must be re-created
- B. This logical JBOD can be presented to the compute nodes in a different frame.
- C. After deleting this logical JBOD, its drives w not be available until a clean-up procedure 6 done
- D. This logical JBOD can be connected to multiple systems to formulate a snared datastore.
Answer: C
NEW QUESTION # 48
Refer to the exhibit.
Which statement about this logical interconnect group is true?
- A. For the given downlink speed, the maximum number of frames is reached
- B. The master modules are located in the interconnect bays 2 and 5
- C. To use interconnect bay set 3, all compute nodes must be half-height
- D. Both master modules are located in the same HPE S ynergy frame
Answer: D
NEW QUESTION # 49
Your customer plans to deploy a VMware ESXi with HPE Synergy platform. They also plan a vSAN deployment leveraging HPE D3940 Storage Modules and SSD drives The customer requested the following components:
- HPE Synergy frame with ten HPE Synergy 480 Gen10 Plus compute modules
- Two HPE Virtual Connect SE 100Gb F32 Modules for Synergy
- An appropriate number of vSAN Standard licenses for each compute node
- One HPE O3940 Storage Module with 40 SSDs - All required cables and options Which statement about this request is true?
- A. One HPE Virtual Connect SE 100Gb F32 Module for Synergy should be replaced with 50GD/S ILM
- B. 20 SSD drives should be removed from this setup, as D3940 supports only 20 SSD or SAS drives.
- C. vSphere Standard licenses should be replaced with Enterprise Plus licenses to enable vSAN
- D. vSphere licenses should be added, as vSAN licenses do not replace vSphere licenses
Answer: C
NEW QUESTION # 50
Refer to the exhibit.
Which statement about this logical JBOD is true?
- A. After deleting this logical JBOD drives will he blocked for 12h m case this JBOD must be re-created
- B. This logical JBOD can be presented to the compute nodes in a different frame.
- C. After deleting this logical JBOD, its drives w not be available until a clean-up procedure 6 done
- D. This logical JBOD can be connected to multiple systems to formulate a snared datastore.
Answer: C
NEW QUESTION # 51
After HPE Superdome Flex deployment and nPar setup, you need to verify health status of HPE Superdome Flex components.
Put the steps on the left into the coned order on the right to perform this task.
Answer:
Explanation:
NEW QUESTION # 52
Your customer has an HPE Synergy platform deployed and managed using HPE OneView. The customer also has HPE Superdome Flex with RMC deployed They plan to deploy a second nPar and HPE Superdome Flex
280 They plan to manage new components using HPE OneView
What must be done to achieve this goal?
- A. The customer has to add HPE Superdome Flex to the HPE OneView used to manage HPE Synergy
- B. The customer must use IL05 to add HPE Superdome Flex systems to HPE OneView
- C. The customer must add a second Rack Management Controller for HPE Superdome Flex 280
- D. The customer should deploy an HPE OneView appliance for HPE Superdome Flex management
Answer: C
NEW QUESTION # 53
Your customer plans to deploy ESXi systems to HPE Synergy and HPE ProLiant servers using HPE OneView for VMware vCenter Server.
Which statement about HPE OneView for VMware vCenter Server functionality is true for this environment?
- A. Only systems managed using HPE Oneview can use HPE Oneview for VMware vCenter Server functionalities
- B. HPE ProLiant servers need an HPE OneView for VMware vCenter Server license for full functionality
- C. Individual systems can be added to HPE OneView for VMware vCenter Server through an ILO management processor
- D. HPE Synergy requires HPE Composer 2 for full functionality of HPE OneView for VMware vCenter Server
Answer: B
NEW QUESTION # 54
......
We offers you the latest free online HPE0-S60 dumps to practice: https://freetorrent.actual4dumps.com/HPE0-S60-study-material.html