Network Appliance Certified NS0-164 Dumps Questions Valid NS0-164 Materials
Current NS0-164 Exam Dumps [2026] Complete Network Appliance Exam Smoothly
NEW QUESTION # 106
You have quiesced a volume to stabilize the contents of a destination just prior to a snapshot.
What is the next logical command that you would issue after the snapshot is complete?
- A. snapmirror quiesce-q
- B. snapmirror restart
- C. options snapmirror.log enable off
- D. snapmirror resume
Answer: D
NEW QUESTION # 107
Refer to the exhibit.
Based on the CPU headroom statistics provided for one node in the cluster, what is the available performance capacity?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION # 108
In an ONTAP based unified storage system, which asymmetrical logical unit access (ALUA) state is indicated as the preferred path?
- A. active nonoptimized.
- B. active active.
- C. active optimized.
- D. optimized.
Answer: C
NEW QUESTION # 109
Five minutes ago, you performed a single file SnapRestore on a large NFS file. 40% of your NFS users are now complaining about getting "stale file handles" for the file.
Which one of the following is the most likely cause of this problem, and the best procedure to correct it?
- A. After a single file SnapRestore, NFS users have to reboot their systems. Have them reboot their systems.
- B. This might be due to an NFS storage appliance and client version mis-match. Check to see that these users have the same version of the NFS client that existed at the time the snapshot was taken.
- C. These users are on a different subnet from the others. Start troubleshooting by checking their subnet.
- D. NFS users who try to access a reverted file without first reopening it might get a "stale file handle" error message. Have the users try to reopen the file and see if the problem is resolved.
Answer: D
NEW QUESTION # 110
Exhibit:
To remove a cluster setup, you must perform the steps displayed in the exhibit.
- A. True
- B. False
Answer: A
NEW QUESTION # 111
Which one of the following commands would you use to disable client access to snapshots on a volume called /vol/flexvoM?
- A. vol options/vol/flexvoM nosnapdiroff
- B. vol options/vol/flexvoM snapdiron
- C. vol options/vol/flexvoM snapdiroff
- D. vol options/vol/flexvoM nosnapdiron
Answer: D
NEW QUESTION # 112
A SnapVault secondary volume can contain up to ______________ Snapshot copies for data protection.
- A. Depends on capacity and number of disk drives
- B. 0
- C. 1
- D. 2
Answer: D
NEW QUESTION # 113
To remove a cluster setup, you must perform the following steps.
1. Type cf disable.
2. Unlicense cluster.
3. Remove partner entries for network interfaces from the /etc/rc file.
4. Halt and make sine the partner-sysid is blank.
5. Power down and remove the cluster interconnect card.
6. Perform steps 1-5 above on the partner node.
- A. True
- B. False
Answer: A
NEW QUESTION # 114
The required hardware to add SyncMirror to an existing Clustered Failover system consists of:
- A. Disk shelves and cluster interconnect
- B. Disk shelves and cabling
- C. Disk shelves, adapters and cabling
- D. Disk shelves and termination switches
Answer: C
NEW QUESTION # 115
In a fabric-attached MetroCluster, hardware disk ownership by a node is determined by which two factors (Choose two.)
- A. how the disks are configured by the administrator
- B. which switch ports the controller and disks are connected to
- C. what types of disks are used in the cluster
- D. what types of ports are on the HBA
- E. the system ID of the controller
- F. the location of the HBA or onboard port
Answer: B,F
NEW QUESTION # 116
Which statement is true?
- A. Data can be written to a NetApp Snapshot copy.
- B. SVM data mobility is a process of transferring data from a virtual machine to a physical machine.
- C. When NetApp ONTAP writes changes to disk, the changed version of the block is overwritten.
- D. Qtrees can be used to manage quotas and security styles.
Answer: D
NEW QUESTION # 117
An administrator wants to provide isolation from connected hosts to the same FCP LUN. Which two features accomplish this request? (Choose two.)
- A. Selective LUN Mapping
- B. IPSpaces
- C. Broadcast Domains
- D. Portsets
Answer: A,D
NEW QUESTION # 118
Identify the two SnapMirror commands that are entered on the destination storage appliance.
- A. options snapmirror.access on
- B. snapmirror resync
- C. snapmirror initialize
- D. snapmirror release
Answer: B,C
NEW QUESTION # 119
An administrator enables the NFS protocol on an SVM and creates a volume to be used as a datastore in a VMware environment. After a rescan, the volume is not visible on the ESXi hosts.
What must the administrator validate to resolve this problem?
- A. Export policy
- B. Security style
- C. Access control
- D. Name service
Answer: A
NEW QUESTION # 120
You can avoid data corruption when you issue the cf forcetakeover-d command if the remote node is
- A. powered on and accessible.
- B. Powered off and inaccessible.
- C. in a giveback mode.
- D. fenced off manually.
Answer: B
NEW QUESTION # 121
Which statement describes how to enable S3 clients to access NAS shares?
- A. must be connected to the same physical network as the NAS storage system.
- B. requires a specialized hardware appliance.
- C. requires modifying the S3 client software.
- D. is not required to reformat the shares to a different file system format.
Answer: D
NEW QUESTION # 122
You can unlicense the cluster feature only in mode with cluster
- A. takeover, enabled
- B. normal, enabled
- C. takeover, disabled
- D. normal, disabled
Answer: D
NEW QUESTION # 123
In a synchronous SnapMirror configuration, the source storage appliance exhibits high latency due to user traffic and rapid data change from SnapMirror transactions. Which one of the following tuning methods best resolves this performance behavior? Edit the /etc/snapmirror.conf file on the destination storage appliance and set:
- A. outstanding=3s
- B. visibility_interval=3s
- C. cksum=3s
- D. src con=3
Answer: A
NEW QUESTION # 124
Which two tools should an administrator use to manage NVMe namespaces? (Choose two.)
- A. SAN Host Tools
- B. System Manager
- C. Config Advisor
- D. ONTAP CLI
Answer: B,D
NEW QUESTION # 125
Snapshot copies for SnapLock volumes are deleted automatically according to the retention count set in the Snapshot schedule.
- A. True
- B. False
Answer: A
NEW QUESTION # 126
......
NS0-164 Premium PDF & Test Engine Files with 263 Questions & Answers: https://freetorrent.actual4dumps.com/NS0-164-study-material.html